Stay Connected:
The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
Call us now

1-800-262-7210

Our Products

or Company PO

We accept

 Wisner Controls
Wisner Controls

We ship via

King Gage ES2 Slimline Electronic Level Transmitter

Our Products: Level Instruments
SKU: 550
King Gauge ES2 Electronic Liquid Level Transmitter with 32ft of cable
Standard Features
Mounting length: standard mount 2
Connection/Termination: cable with integral molded connector (M12), -3
Range: 0 - 30 psig/ 0 -2.06 bar, -30
List Price: $2,039.44
Price: $1,835.50
You Save: $203.94 (10%)
King Gage ES2 Slimline Electronic Level Transmitter
King Gage ES2 Slimline Electronic Level Transmitter
Product Details
• Robust protection in washdown environments
• Continuous liquid level measurement
• Two wire loop powered (4-20 mA)

KING-GAGE® ES2 transmitters provide liquid level measurement for inventory monitoring. Add to their rugged reliability the major benefits of simplified service and maintenance. Performance characteristics of these transmitters include excellent stability and repeatability (better than 0.02% FS). Transmitter span accommodates a 3:1 turndown ratio* to match the application pressure range (i.e. tank depth) and the 4-20 mAdc output is compatible with PLCs or other control architecture using analog I/O.

KING-GAGE ES2 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings.

Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Washdown environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES2 transmitter’s enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today’s processing environment.

Sanitary Configurations
These sensors are especially suited to a wide range of sanitary applications on storage or continuous processing vessels. The 316 stainless diaphragm is appropriate for flush mount, clean-in-place installation employing an FDA-approved silicone rubber O-ring seal to achieve the crevice-free, positive compression seal between diaphragm and tank liner. Sanitary tank mountings include flush weld mountings with product contact surfaces of 316L stainless. (Quick disconnect sanitary adapters are also available for sensor mounting.)

*3:1 turndown ratio is applicable to 0â€"10 and 0â€"30 nominal range, refer to specifications for detailed span adjustment available on specific range models.
 
Includes a molded M12 cable 32 ft long.
 
 
 
King Gage ES2 Instruction Manual